EdgeStar GRL270IBLP, Руководство пользователя

Страница: 22 / 50

22
1. Ensure the 20 lb. LP tank valve is fully closed and in the off position. To do so, make sure the tank
handle is turned all the way clockwise. You should not hear a hissing noise or smell propane.
2. All gas control (burner) knobs must be in the off position.
3. Align the 3/8” brass coupling nut with the LP tank threads; turn the coupling nut clockwise by
hand. Note that the fittings have flared ends and do not require any modifications or sealant. Do
not overtighten the coupling nut connection as it may cause damage or strip the threading.
4. Open the LP tank valve by turning the handle counterclockwise.
5. Using a soapy water mixture in a spray bottle, check for leaks at all joints and connection points.
Bubbles should not form in the soapy water mixture. See the section titled,
“Checking for Gas
Leaks” in this manual for further instructions and details.
6. Once you have confirmed that all connections are secure and there are no gas leaks, turn the
burner control valves on the unit to the “HIGH” position for about 20 seconds to allow the air in the
system to purge before attempting to light the burners. Wait 5 minutes after completing this before
lighting the burners.
7. Once the system has purged, you are free to proceed with normal use of the grill. All connection
points must be free from gas leaks before first use of the gas grill.
8. A reminder to always close the LP tank valve [by turning the handle clockwise] when the grill is not
in use.
To Connect the LP Gas Supply:
WARNINGS:
• Always leak-test the connection after refilling or exchanging LP cylinders.
• Do not store or use gasoline or other flammable liquids or vapors in the vicinity
of this or any other appliance.
• Turn off LP supply at cylinder when appliance is not in use.
• An LP cylinder not connected for use shall not be stored in the vicinity of this or
any other appliance.
• Do not place more than one (1) LP cylinder in the construction space or cart.
!
X