29
ENGLISH
INSTRUCTION MANUAL
Connect the computer to the connector on the
treadmill frame using the cable.
Attach the handle (2) to the vertical frame using
M8 screws.
Attach the hydraulic cylinder (8) to the base (9)
using M8 screws.
Functional check before use
Before the treadmill is connected to the power,
you must check that the belt can move
unhindered and without noise on the rollers.
Insert the safety key (22) into the computer.
Insert the plug into the mains socket and switch
on the power.
Switch on the treadmill using the on/off switch
(24).
The computer shows „0“. The belt does not move.
Press the START/STOP button. The belt starts to
run at low speed.
Press the FAST and SLOW buttons. Check that the
belt speed changes accordingly.
Press the START/STOP button to stop the
treadmill.
