Edge-Core ES3528MV2, Руководство по управлению, Страница: 730 / 1480

C
HAPTER
20
| System Management Commands
Line
– 730 –
databits
This command sets the number of data bits per character that are
interpreted and generated by the console port. Use the no form to restore
the default value.
S
YNTAX
databits { 7 | 8 }
no databits
7 - Seven data bits per character.
8 - Eight data bits per character.
D
EFAULT
S
ETTING
8 data bits per character
C
OMMAND
M
ODE
Line Configuration
C
OMMAND
U
SAGE
The databits command can be used to mask the high bit on input from
devices that generate 7 data bits with parity. If parity is being generated,
specify 7 data bits per character. If no parity is required, specify 8 data bits
per character.
E
XAMPLE
To specify 7 data bits, enter this command:
Console(config-line)#databits 7
Console(config-line)#
R
ELATED
C
OMMANDS
parity (732)
exec-timeout
This command sets the interval that the system waits until user input is
detected. Use the no form to restore the default.
S
YNTAX
exec-timeout [ seconds ]
no exec-timeout
seconds - Integer that specifies the timeout interval.
(Range: 60 - 65535 seconds; 0: no timeout)
D
EFAULT
S
ETTING
CLI: No timeout
Telnet: 10 minutes
C
OMMAND
M
ODE
Line Configuration