Versatrax 300™
Document: UMBH008532.docm
Revision: A07
Created by: KJB
Date: 26 Sep 2019
3047763-A07
Source Location: C:\ePDM\ISLEng\products\bh-vt300series4-trackchassis\manuals\UMBH008532.docm
Page 51 of 67
Versat
rax 30
0 User Ma
nu
al
For IB
A
5954
4. If the tether tension does not seem excessive, and you know (from the inspection) that the pipe is
clear, you can tow the vehicle out with the winch. The winch will tow the vehicle at between 60
and 100 feet per minute, depending on how full the drum is.
Warning:
Driving forward while the vehicle is being towed backwards by the winch may destroy
the track motor drivers. Always engage the
Start Retrieval
button before towing.
1. When the vehicle arrives at the deployment hole stop towing and resume driving the vehicle. As
the vehicle comes under the opening the tow cable and back of the vehicle will begin to lift. At this
point stop and attach the lifting hoist.
2. Use the extendable hooking pole to attach the cable hoist to the large shackle between the
Kellems grip and the tow cable.
3. When the cable is attached lift away the pole and hoist the vehicle out of the hole.
FIGURE 38: RETRIEVAL HOOK
