MaggHD™
Document: UMAU015088.docm
Revision: A08
Created by: KJB
Date: 26 Sep 2019
3080885-A08
Source Location: C:\ePDM\ISLEng\products\au-micromag\manuals\UMAU015088.docm
Page 23 of 29
User Ma
nual
ICON
™ & ICON RPT™
Vehicle control and video recording are accomplished using ICON
™ graphical interface controller
software. Video playback and reporting are conducted through ICON RPT
™.
Manuals for these two
software packages are included separately.
Controls for recording and snapshot functions are kept on-
screen with the camera controls.
•
ICON Manual
– (Control Interface and Recording)
•
ICON RPT Manual - (Reporting, Playback and Video Export)
Driving the Vehicle
When driving the vehicle, the operator should always be conscious of things that could cause the vehicle
to disengage from the driving surface, either by drastically increasing magnet gap or overcoming the
magnetic force entirely. These include the following:
•
Welds or obstacles that are too large for the vehicle
•
Inward bulges or curves that increase magnet distance
•
Sheathing or coatings that increase magnet distance
•
Tensioning the tether at a large angle from the driving surface (approaching perpendicularity)
Always try to minimize the above risks to avoid system damage.
