eDAQ Picostat Скачать руководство пользователя страница 121 | Manualshive

Страница: 121 / 122

background image

eDAQ Potentiostats

117

License & Warranty

Trademarks

e-corder

and PowerChrom are registered

trademarks of eDAQ Pty Ltd. All eDAQ software,
hardware, and documentation is protected by
copyright. eDAQ retains the exclusive ownership of
the trademarks and registered trademarks
represented by its company name, logo, and
product names.

Responsibilities

You and any others using any eDAQ product agree
to use it in a sensible manner for purposes for which
it is suited, and agree to take responsibility for their
actions and the results of their actions.

If problems arise with an eDAQ product, eDAQ will
make all reasonable efforts to fix them. This service
may incur a charge, depending on the nature of the
problems, and is subject to the other conditions in
this Agreement.

Hardware Warranty

eDAQ Pty Ltd warrants the Potentiostat or Picostat, to
be free of defects in material and workmanship for
one year from the date of purchase. eDAQ Pty Ltd
will repair or replace defective equipment as
appropriate.

To obtain a warranty repair/replacement you must
first notify us before return of the instrument and we

will issue you with a RAN (return authorization
number). You must ship the defective product at your
expense. We will pay return shipping. The product
should be packed safely (preferably in its original
packaging) and have the RAN on the shipping
label. Returns sent without a RAN may be refused
delivery.

This warranty does not cover hardware that has:

• been modified by the user in any way;

• been subjected to unusual physical, electrical,
or environmental stress. This includes damage
due to faulty power sockets, inadequate
earthing, or power spikes or surges;

• been damaged because of incorrect wiring to
ancillary equipment, or because of substandard,
connectors or cables; or

• had the original identification marks removed
or altered.

Software License

You have the non-exclusive right to use the supplied
eDAQ software (Chart, Scope etc). Your employees
or students, for example, are entitled to use it,
provided they adhere to this agreement. Each
separate purchase of the eDAQ software licenses it
to be used on two computers at any given time (on
one computer for data acquisition with a

e-corder

hardware unit, and on a second computer for the
analysis of existing data files). Although multiple

Potentiostat

Overload

«
...
119
120
121
122
»

Содержание Picostat



























































































































Отзывы:

Нет отзывов

Похожие инструкции для Picostat

Бренд: Makita Страницы: 10

Бренд: FEAS Страницы: 72

Бренд: QBC Diagnostics Страницы: 65

Бренд: Haki Страницы: 24

Бренд: Dakota Digital Страницы: 5

Бренд: T-Rex Страницы: 13

Бренд: Farmi Forest Corporation Страницы: 32

Бренд: JBL Страницы: 38

Бренд: JBSYSTEMS Light Страницы: 32

Бренд: JBM Страницы: 12

Бренд: LANGER EMV-Technik Страницы: 25

Electric Clamshell CSE12-208VCD

Бренд: Lang Страницы: 16

Brillion 3631-25

Бренд: Landoll Страницы: 138

Бренд: Park Tool Страницы: 4

Бренд: Qlight Страницы: 4

Бренд: Quantum Страницы: 11

Бренд: Quanser Страницы: 21

Бренд: Quanser Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды