en
5
InstallIng the WIng
1. Remove the long wing clip from the wing mounts.
2. Align the holes in the wing with the wing mounts.
3. Press the wing onto the wing mounts.
4. Secure the wing by sliding the long wing clip through
the wing mounts.
InstallIng the Battery In the VehIcle
reMoVIng/InstallIng the VehIcle Body
removing
1. Remove the two body clips.
2. Pull off the body.
Instaling
1. Install the body over the two body posts.
2. Install the two body clips.
1. Loosen the hook and loop straps.
2. Install a fully charged battery.
3. Tighten the hook and loop straps.
• Never install damaged batteries.
• Never install batteries of mixed types or of different ages
in the transmitter.
• Always remove exhausted batteries.
• Always remove batteries before storing the transmitter.
• Low battery power can result in loss of control of the RC vehicle.
transMItter Battery safety PrecautIons
