manualshive.com logo in svg

ECS 761GXM-M2, Руководство пользователя, Страница: 40 / 58

Поделиться
Скачать
ECS 761GXM-M2 Скачать руководство пользователя страница 40

34

Using BIOS

Power Management Setup

This page sets up some parameters for system power management operation.

Enable /Disable
ACPI support for
Operating
System.

ENABLE: If OS
supports ACPI.

DISABLE: If OS
does not support

Help Item

CMOS Setup Utility - Copyright  (C)  1985-2005, American Megatrends, Inc.

              Power Management Setup

ACPI Aware O/S

Yes

Power Management

Enabled

Suspend mode

S1

Suspend Time Out

Disabled

Resume On RTC Alarm

Disabled

Resume On KeyBoard

Disabled

Keyboard Power On

Disabled

LAN/Ring Power On

Disabled

ACPI Aware O/S (Yes)

This item supports ACPI (Advanced Configuration and Power management Inter-
face). Use this item to enable or disable the ACPI feature.

Power Management (Enabled)

Use this item to enable or disable a power management scheme. If you enable power
management, you can use the items below to set the power management operation.
Both APM and ACPI are supported.

Suspend mode (S1)

This item selects the status S1 (Stop Clock) or S3 (Suspend to RAM) when the system
enters the power-saving Suspend mode.

Suspend Time Out (Disabled)

This sets the timeout for Suspend mode in minutes. If the time selected passes
without any system activity, the computer will enter power-saving Suspend mode.

Resume On  RTC Alarm (Disabled)

The system can be turned off with a software command. If you enable this item, the
system can automatically resume at a fixed time based on the system’s RTC (realtime
clock). Use the items below this one to set the date and time of the wake-up alarm.
You must use an ATX power supply in order to use this feature.

Resume On  KeyBoard (Disabled)

The system can be turned off with a software command. If you enable this item,
system can automatically resume by pressing any keys or power keys on the key-
board, or typing in the password. You must use an ATX power supply in order to use
this feature.

mnlk

: Move

F10: Save    ESC: Exit

Enter : Select

+/-/: Value

F9: Optimized Defaults

F1: General Help

KeyBoard Power On (Disabled)

If you enable this item, system can automatically resume by pressing hot keys on the
keyboard or typing in the password. You must enable the Key-board Power On
jumper and use an ATX power supply in order to use this feature.

Содержание 761GXM-M2



























































Отзывы:

Нет отзывов