ECS 761GXM-M2, Руководство пользователя, Страница: 38 / 58

32
Using BIOS
Spread Spectrum (Disabled)
If you enable spread spertrum, it can significantly reduce the EMI (Electro-Magnetic
interface) generated by the system.and voltage according to its temperature.
Features Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Setup
OnBoard Floppy Controller Enabled
Serial Port1 Address 3F8/IRQ4
OnBoard IR Port Disabled
Parallel Port Address 378
Parallel Port Mode ECP
ECP Mode DMA Channel DMA3
Parallel Port IRQ IRQ7
OnBoard PCI IDE Controller Both
OnBoard PCI SATA Controller IDE
Onboard AC97 Audio DEVICE Enabled
OnBoard AC97 Modem DEVICE Auto
Onboard LAN Device Enabled
OnBoard LAN Boot ROM Disabled
OnBoard USB Function Enabled
USB Function For DOS Disabled
Help Item
Allows BIOS to
Enable or Disable
Floppy Controller.
OnBoard Floppy Controller (Enabled)
Use this item to enable or disable the onboard floppy disk drive interface.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1/2 serial port, and to assign
a port address.
OnBoard IR Port (Disabled)
Use this item to enable or disable the onboard infrared port, and to assign a port
address.
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a port
address.
Parallel Port Mode (ECP)
Use this item to set the parallel port mode. You can select ECP (Extended Capa-
bilities Port) & EPP (Enhanced Parallel Port).
ECP Mode DMA Channel (DMA3)
This item assigns a DMA channel to the parallel port.
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults
F1: General Help
Parallel Port IRQ (IRQ7)
Use this item to assign IRQ to the parallel port.