manualshive.com logo in svg

ECS 761GXM-M2, Руководство пользователя, Страница: 20 / 58

Поделиться
Скачать
ECS 761GXM-M2 Скачать руководство пользователя страница 20

14

Installing the Motherboard

1

Install your CPU. Pull up the lever away from the

socket and lift up to 90-degree angle.

2

Locate the CPU cut edge (the corner with the pin

hold noticeably missing). Align and insert the CPU
correctly.

3

Press the lever down and apply thermal grease on

top of the CPU.

4

Put the CPU Fan down on the retention module and

snap the four retention legs of the cooling fan into
place.

5

Flip the levers over to lock the heat sink in place and

connect the CPU cooling Fan power cable to the
CPUFAN connector. This completes the installation.

CPU Installation Procedure

The following illustration shows CPU installation components.

To achieve better airflow rates and heat dissipation, we suggest that you use
a high quality fan with 4800 rpm at least. CPU fan and heatsink installation
procedures may vary with the type of CPU fan/heatsink supplied. The form
and size of fan/heatsink may also vary.

Содержание 761GXM-M2



























































Отзывы:

Нет отзывов