Ecreso HELIOS 100W, Руководство пользователя

Страница: 58 / 127

Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.ecreso.com – contact@ecreso.com
Helios 20, 50 or 100 W, User Manual – 01/2011
Page 58
OR
T° OK
HF STOP T° LOCK
Indicates the temperature is correct with more than 2 defaults or links
within an hour.
EXC= 75k Mx= 78 k
I I I I I I I I I I I I I
Displays the average deviation (DEV) in kHz and its maximum value (Mx)
while reading the bargraph. Turn the potentiometer (Mono/MPX) while
reading the desired deviation.
L I I I I I I I I I I I
L I I I I I I I I I I I
Displays the entry level of the left and right channels if there is an internal
stereo coder.
Enter to access the following three menus:
R= +12.0dB Mx= +15
L= +11.5 dB Mx= +14
Check the levels in both channels.
Enter.
R= +12.0dB Mx= +15
L I I I I I I I I I I I I
Check the right channel.
Enter.
L= +11.5dB Mx= +14
L I I I I I I I I I I I I
Check the left channel.
Enter.
RDS ********
NO SIGNAL
Indicates the radio name (Program Service Parameter of RDS) and the
reception level of the RDS inside the bargraph form.
EXIT
MEASURES MENU
Checking parameters is completed.
Press Enter to return to the main menu.
If you need to edit the settings, go back to the configuration menu, if it is not the case, change to distant
mode.
If your exciter has an optional FM receiver module, you can check the sound quality of your
transmitter by plugging a stereo headphone on the front panel of the HELIOS transmitter (AF MONITOR).
6.3.4. Checking the Goliath settings
The Measures menu allows the user to verify that output power of the amplifier has been correctly
configured.
To navigate through menus, see ‘Goliath MEASURES Menu".
MEASURES
ENTER
Select this menu and press ENTER.
515W
I I I I I I I I I I I I I I I
Check forward power settings.