9
Phase Button
Press
PHASE
briefly to toggle the Extreme Sub sound output from in
phase to out of phase. If the AUX LED flashes Green 3 times, the sound
output is in phase. If the AUX LED flashes Red 3 times, the sound output
is out of phase.
Note:
Pairing multiple subwoofers, depending on their location to one
another, can result in the subwoofers sounding out of phase with each
other and a reduction in their overall, perceived volume output. Toggle
the
PHASE
button to determine which setting provides the optimal
bass performance.
Adjust Gain
Press
briefly to reduce the gain. Press
briefly to increase the gain.
The LEDs between the Gain Control Buttons indicate the gain level. When
increased, the LEDs will light up, towards the right. When decreased, the
LEDs will turn off, towards the left.
Notes:
· When you adjust the volume level on your connected ECOXGEAR
SoundExtreme soundbar, the volume level will adjust automatically
on the Extreme Sub. The gain controls allow you to change the relative
value of the subwoofer compared to the soundbar.
· The Gain Control Buttons control the sensitivity of the amplifier built
into the subwoofer. You will want to optimize the gain level of the
subwoofer depending on the type of music you enjoy as well as the
location of the Extreme Sub.
Adjust Crossover
Press
briefly to reduce the frequency range that the amplifier sends to
the subwoofer. Press
briefly to increase the frequency range.
The LEDs between the Crossover Control Buttons indicate the frequency
level. When increased, the LEDs will light up, towards the right. When
decreased, the LEDs will turn off, towards the left.