8
Operations
Auto-Turn-On Switch
Turn the Auto-Turn-On Switch to select one
of three modes: Remote, Audio, and DC.
Remote:
When the switch is turned to this
position, the (Dark Blue) Remote Turn-On
Cable must be connected to the vehicle
ignition switch or the vehicle’s 12VDC power
supply. When the vehicle’s ignition is on or
the Remote Turn-On Cable has a 12VDC
signal, the Extreme Sub will turn on.
Audio:
When the switch is turned to this position, the Aux-In / Sub-In
Jack must have an Aux-In audio input connection from a soundbar, an
amplifier, or stereo receivers. The Extreme Sub will turn on only when there
is an audio signal input.
DC:
When the switch is turned to this position, the Extreme Sub will turn
on whenever there is a 12VDC power supply.
LED Indicators
There are two LED Indicators at the top of the Control Panel. The left LED
Indicator corresponds to AUX and Phase, and the right LED Indicator
corresponds to EcoCast Receiving.
1.
AUX
Solid Blue: When an Aux-In cable is plugged in
Phase - Sound Output
When the Phase Button has been pressed, the AUX LED flashes 3
times to indicate if the Extreme Sub sound output is in or out of phase.
Flashing Green: Sound output is in phase
Flashing Red: Sound output is out of phase
2.
ECOCAST
Flashing Green: EcoCast Receiving Mode - Pairing
Solid Green: EcoCast Receiving Mode - Paired