7
Controls
1.
LED Indicators:
Each of the 2 LEDs correspond to different functions:
AUX, Phase, and EcoCast Receiving.
2.
Phase Button:
Press this button to toggle the Extreme Sub sound
output from in phase to out of phase. If the AUX LED flashes Green
3 times, the sound output is in phase. If the AUX LED flashes Red 3
times, the sound output is out of phase.
3.
EcoCast Button:
When turned on, the Extreme Sub enters EcoCast
Receiving Mode. If it is not paired with a SoundExtreme, press this
button to put the Extreme Sub into Pairing Mode.
4.
Party Lights Button:
Press to cycle through the following 12 Party
Light Modes: Red, Orange, Yellow, Green, Cyan, Blue, Purple, White,
Music Sync, FADE7, JUMP7, Color Fade. Press and hold to turn off the
Party Lights.
5.
Gain Control Buttons:
Press to increase or decrease the gain level of
the Extreme Sub. The Gain Controls allow you to change the relative
value of the Extreme Sub compared to the SoundExtreme.
6.
Crossover Control Buttons:
Press to decrease or increase the frequency
range of the Extreme Sub. Reducing the Crossover Frequency will result
in the Extreme Sub performing solely as a low frequency subwoofer.
7.
Auto-Turn-On Switch:
Turn the switch to select one of three modes:
Remote, Audio, and DC.
CONTROL
PANEL
AUTO-TURN-
ON SWITCH
2
3
4
5
6
1
7