3
In/Out Connections
Do
NOT
use these connections if they are wet.
Aux-In / Sub-In Jack:
If you do not want to connect the Extreme
Sub wirelessly via EcoCast or want to connect it to a non-ECOXGEAR
amplifier or speaker, you can connect the subwoofer using this input
and the supplied 3.5mm Audio Cable. Connect it to any brand of stereo,
amplifier, or soundbar’s wired subwoofer-out or line-out.
Remote Gain Level Control Jack:
This input can be connected to the
supplied Remote Gain Level Controller, which allows for easy adjustment
of the Extreme Sub’s overall output.
Remote Turn-On Jack:
This input can be used to turn on or turn off the
Extreme Sub by another device. When the Auto-Turn-On Switch is turned
to “Remote,” a 12VDC signal will turn on the Extreme Sub. A (Dark Blue)
Remote Turn-On Cable has been provided for your convenience.
12V Power-In Connector:
This connector is used to connect to an external
12VDC power supply, with a minimum of a 30A current rating, via the
supplied 6.6ft Power Cable (EC5, female).
Aux-In / Sub-In
Jack (Black)
Remote Gain Level Control
Jack (Green)
Remote Turn-On
Jack (Dark Blue)
12VDC Power-In
Connector (EC5, Male)
