ECOWITT GW1002, Руководство по эксплуатации

Страница: 12 / 58

12
Figure 5: Sensor package assembly components
1. Anemometer cups 6. LED (red) indicating data transmission
2. Wind vane 7. Light sensor and UV sensor
3. Connection tube 8. NORTH alignment indicator
4. U-Bolts (2) 9. Solar panel
5. Mounting pole (not
included)
10. Reset button
Table 2: Sensor package assembly component list
4.2.1 Install U-bolts and metal plate
Installation of the U-bolts, which are in turn used to mount the sensor
package on a pole, requires installation of an included metal plate to receive
the U-bolt ends. The metal plate, visible in Figure 6, has four holes through
which the ends of the two U-Bolts will fit. The plate itself is inserted in a
groove on the right bottom of the unit. Note that one side of the plate has a
straight edge (which goes into the groove), the other side is bent at a 90-