ECOWITT GW1002, Руководство по эксплуатации

Страница: 31 / 58

31
Figure 20: Configure screen
6. Confirm Wi-Fi configuration mode is active, as prompted. Correct if
necessary (see above). Press “Next”.
7. Enter your preferred Wi-Fi SSID (network name) and security password.
Press “Next”. This will be communicated to the gateway in a later step.
8. Now switch your mobile device to the ad-hoc Wi-Fi network created by
your gateway. It will be named something like “GW1000-WIFI”
followed by some numbers. Wait until connected. You may see a
message such as “Unsecured Network” and “No Internet connection”:
this is normal and can be ignored.
9. Return to the mobile application. The connection should be recognized,
and you should see a few messages about connecting to the gateway and
configuring it. The RED LED on the gateway should now no longer be
flashing red.
10. Your mobile device should have been returned to your normal Wi-Fi
network setting and the “Live Data” screen should be providing a read-
out of your sensors.