EcoWater ESM11CE, Руководство пользователя

Страница: 24 / 33

24
ECOWATER
S Y S T E M S
Faceplate Controller, Features/Options
Advanced/Service Menu, continued
Set Model: The controller is factory set to the model code, which provides the
shortest recharge times and greatest water savings. Do the following to change
to this code, if desired.
1) Press the (
↑
) or (
↓
) keypads until cursor is next to Set Model and press SE-
LECT/EXIT (
↵
). Warning screen will display, press (
↑
) to continue.
2) Use the (
↑
) or (
↓
) keypads to change to new model code. Be sure to set the
correct code, or the EcoWater conditioner will operate on incorrect timing.
NOTE: If this feature is changed, it will delete all information stored in the control-
ler (Hardness, Recharge time will have to be reset. All usage history will be
cleared). When you are certain the correct code appears, press SELECT/EXIT
(
↵
) to exit. Warning screen will appear after changing model code, press (
↑
) to
continue. The display will return to the start--up screens.
MODEL NUMBER
(on rating decal)
Required Code
ESM11CE E11
ESM15CE E15
Restore To Factory Settings: Press the (
↑
) or (
↓
) keypads until cursor is next
to Restore System and press SELECT/EXIT (
↵
). Default is No. If set to Yes will
restore controller to factory settings. NOTE: This will affect ALL settings, and
controller will go through first time set--up screens again. Press SELECT/EXIT
(
↵
) to exit.
NOTE: ALSO SEE SERVICE INFORMATION, PAGES 28 THROUGH 29.