EcoWater ESM11CE, Руководство пользователя

Страница: 23 / 33

23
ECOWATER
S Y S T E M S
Faceplate Controller, Features/Options
Advanced/Service Menu, continued
Efficiency Mode: Press the (
↑
) or (
↓
) keypads until cursor is next to Efficiency
Mode and press SELECT/EXIT (
↵
). Default is Auto Adjusting which has a
minimum efficiency of 3350 grains/lb of salt ( = 48.2 _ Fm # /kg of salt). Use the (
↑
)
or (
↓
) keypads to change to either High Capacity which sets the regeneration
salt doses that are increased by a certain % to handle applications requiring 1.5
PPM (parts per million) or less soft water, or to handle special cases such as low
leakage requirement or problem water conditions; and Salt Efficient which oper-
ates at a minimum of 4000 grains/lb of salt (= 57.5
_
Fm
#
/kg of salt) . Changing
this setting will prompt a warning that changes could affect performance. Press
SELECT/EXIT (
↵
) to exit.
Set Max Days/Recharge: Press the (
↑
) or (
↓
) keypads until cursor is next to Set
Max Days/Recharge and press SELECT/EXIT (
↵
). Default is Automatic. The
algorithm will determine when to recharge. Use the (
↑
) or (
↓
) keypads to change
between 1 and 15 days. With this setting the unit will never go past number of
days set for a recharge, but could recharge before. Press SELECT/EXIT (
↵
) to
exit.
Set 97% Feature: Press the (
↑
) or (
↓
) keypads until cursor is next to Set 97%
Feature and press SELECT/EXIT (
↵
). Default is Off. Use the (
↑
) keypad to set
to On. By setting to On, unit will automatically recharge when 97% capacity has
been used, at any time of day. Press SELECT/EXIT (
↵
) to exit.
Set Backwash Time: Press the (
↑
) or (
↓
) keypads until cursor is next to Set Back-
wash Time and press SELECT/EXIT (
↵
). Time can be changed from 1 to 30
minutes. See chart on page 4 for recommended backwash time. Press SE-
LECT/EXIT (
↵
) to exit.
Set 2nd Backwash: Press the (
↑
) or (
↓
) keypads until cursor is next to Set 2nd
Backwash and press SELECT/EXIT (
↵
). Default is Off. Use the (
↑
) keypad to
set to On. When set to On, unit will always perform a 2nd backwash and rinse.
Press SELECT/EXIT (
↵
) to exit. Elect this feature if water contains a lot of sedi-
ment or iron.
Set Fast Rinse: Press the (
↑
) or (
↓
) keypads until cursor is next to Set Fast Rinse
and press SELECT/EXIT (
↵
). Time can be changed from 1 to 30 minutes. See
chart on page 4 for recommended fast rinse time. Press SELECT/EXIT (
↵
) to
exit.
continued