Ecotech Marine QuietDrive, Руководство пользователя

Страница: 19 / 19

p.
17
Troubleshooting
Flashing Red LED
Flashing Red/Orange LED
Flashing Red/Yellow LED
Flashing Red/Green LED
Flashing Red/White LED
Solid Red LED
Very fast flashing red, no LED at all when
powered up, or multiple random colors
• Issue: Pump disconnect error
• Resolution: See section 6.0 of the full ES manual: Pump Disconnect Error Protection
Available at ecotechmarine.com/downloads
• Issue: A component in the motor has gone bad
• Resolution: If you are under warranty, contact EcoTech Marine for a
replacement motor. If you are outside warranty, visit the parts store at
www.ecotechmarine.com to purchase a new motor.
• Issue: The pump has over heated
• Resolution: Clean the wetside and check that there are no obstructions
blocking the rotation of the wetside or dryside. If the problem persists,
contact EcoTech Marine to speak with a service representative.
• Issue: Stall error
• Resolution: Completely disassemble and clean the wetside then check that
there are no obstructions blocking the rotation of the wetside or dryside.
If the problem persists, contact EcoTech Marine to speak with a service
representative.
• Issue: Wireless upgrade error
• Resolution: Re-attempt the upgrade process until it completes successfully.
Alternatively, you can use a normally functioning pump to re-flash the pump
with the red/white error code. If none of this works, contact EcoTech Marine
to speak with a service representative.
• Issue: Upgrade Error
• Resolution: Re-attempt the upgrade process until it completes successfully.
Alternatively, you can use a normally functioning pump to re-flash the pump
with the red/white error code. If none of this works, contact EcoTech Marine
to speak with a service representative.
• Issue: All of the earlier codes represent actual error codes programmed into
the driver. The error above however, reflects that some damage to the pump
has occurred preventing it from functioning properly.
• Resolution: contact EcoTech Marine to speak with a service representative.
Error Codes