Ecotech Marine QuietDrive, Руководство пользователя, Страница: 7 / 19

p.
5
Gyre Mode
Short Pulse Mode
Gyre mode creates a flow pattern consisting of uniform clockwise
and *counterclockwise flow levels pulsing at a selected interval
between two seconds and two hours.
To use Long Pulse Mode, tap MODE until the LED turns pink.
Now by adjusting the knob you can change the maximum speed
that the pump achieves during Long Pulse Mode, which will be
indicated by the LED strip. Tap SET to save this maximum speed
and to begin tuning the frequency. When you adjust the knob, you
will see that the frequency changes corresponding to the pulse
frequency in the LED strip.
You can now save this patter by holding SET. The LED knob will
blink and then start breathing pink, indicating that the pattern has
been saved.
The graph below represents the sequence of long pulses that the
VorTech pump will make when set to Long Pulse Mode.
Short Pulse mode creates a flow pattern consisting of uniform high
and low levels pulsing at a selected interval between 0.2 seconds
and 2 seconds.
To use Short Pulse Mode, tap MODE until the LED turns blue. Now
by adjusting the knob you can change the maximum speed that
the pump achieves during Short Pulse Mode. Tap SET to save this
maximum speed and to begin tuning the frequency. When you adjust
the knob, you will see that the frequency changes corresponding to
the pulse frequency in the LED strip.
At this time you have two options, if you are happy with the wave
that you have manually created, you can hold SET to save this
wave. Your saved wave will be indicated by a breathing blue LED
instead of a constant one. The other option is to enter the auto-tune
function of the QuietDrive driver.
*Alternating directional gyre requires multiple pumps.
% of
User
Set
Speed
Time
% of
User
Set
Speed
Time