Ecotec BioLine 20, Инструкция по эксплуатации

Страница: 8 / 28

8
Control system
The functioning of the burner is controlled and monitored by the accompanying control
system. The following pages in the manual describe the options for adjusting the burner
settings which are available to users. If you are not sure about how to use the control
system or if a specifi c setting is not available, contact your distributor.
NOTE: When the control system starts up, the processor is always disconnected
for about 180 seconds.
If you want to bypass the countdown, press the Stop button once.
You can change the
parameters in the
control system using
its menu options.
Button
Description
Used to start the burner.
Used to stop the burner.
Used to move up through a menu and to change a parameter
to a higher value. Deletes information messages, such as alarms.
Used to move down through a menu and to change a parameter to a
lower value.
Used to select a submenu or a parameter and to confi rm the changed
value.
Used to return to a previous menu. Used when changing a parameter
value to go back without changing the value.
USING
THE C
ONTR
OL SY
STEM