Ecoplus SWBM-10.5H-B/P-S, Инструкция по эксплуатации, Страница: 11 / 24

Operation introductions
1. Initialization
◎
Under start-up state, LCD screen left side displays the water inlet setting temperature,
right side displays the actual water inlet temperature ; Under stand-by state, LCD main
interface only displays the actual water inlet temperature on the right side .
◎
Under start-up state, LCD screen displays heating symbol ; Stand-by state , LCD
screen does not display heating symbol ;Defrosting state, flashes
◎
When setting the time of Timer On / Timer Off , LCD screen displays timer symbol
"ON""OFF".
2.
Definition of LCD Controller Buttons.
2.1 " "
for ON /OFF and Return
2.1.1 On main interface, Press
“ ”
to turn on or turn off the heat pump.
2.1.2 After entering parameter or clock setting, press
“ ”
once to return to
main interface.
Start-up state
Stand by state
1
2
Initialization
Ⅵ .Operation introductions
Water heater
2.2 " " for Status Inquiry
2.2.1 Press
“ ”
once to enter parameter inquiry,
2.2.2 Long press " " for 5 seconds to enter parameter setting status inquiry.
2.3 " "
＆
" " for Up and Down
2.3.1 Under start-up state, press
“ ”
and
“ ”
to directly adjust/set the hot
water temperature .
2.3.2 Press
“ ”
and
“ ”
/
“ ”
to check and adjust the parameters .
2.4 " "
for Clock and Auxiliary Heater setting
2.4.1 Press
“ ”
once to enter Clock setting, meanwhile press
“ ”
/
“ ”
to adjust the time.
2.4.2 Long press
“ ”
for 5 seconds to switch on or off the auxiliary heater
function . When Auxiliary heater symbol
“ ”
is displayed, system allows
to start the Auxiliary heater function.
8