Econo-Wrap EW-1800T, Руководство оператора, Страница: 78 / 128

Self - loading Bale Wrapper EW - 1800T
78
9. Maintenance
9.1. Maintenance after work
After the work is finished, the machine should be thoroughly cleaned and washed with a running water stream. In the case of
high - pressure devices, exercise caution and do not direct the stream directly towards any types of labels on the machine and
elements such as bearings, shaft joints, etc. It is recommended that cleaning and washing be carried out on the wash
equipped with a water treatment system or a settlement tank for waste neutralisation.
Having performed the cleaning and drying of the machine, check the general technical condition of all sub - assemblies and, if
needed, remove any found damage or replace a worn element with a new one.
In case of varnish coating damage, remove any mechanical residues of an old painting, degrease, and then apply a primer
coat. When the primer coat is dry, apply the paint coat. Replace damaged and worn out parts with new ones. Check all the
screwed joints, tighten the loose screws and nuts according to Table. The manufacturer of the machine, Tar River Imple-
ments, provides all spare parts.
Caution!
Nuts with polyamide insert – self - locking (jam) are disposable and cannot be reused after disassembly. Replace them with
new ones.
Caution!
For servicing and maintenance operations, general - purpose hand tools such as combination spanners, socket wrench, Allen
keys and other tools should be used in accordance with their operating instructions, taking into account their operability and
safety requirements