Econo-Wrap EW-1800T, Руководство оператора, Страница: 11 / 128

Self - loading Bale Wrapper EW - 1800T
11
•
Before the operation, check the condition of the machine and of the vehicle it is attached to. Ensure the vehicle and
bale wrapper are in good technical condition. Any worn or damaged parts must be replaced immediately.
•
The bale wrapper must be equipped with all the safety guards (provided by the manufacturer), preventing access to
any moving parts. The guards must be complete and fully operational.
•
It is not allowed to work with the bale wrapper without safety guards. It is not allowed to work with damaged safety
guards.
•
It is not allowed to lift the grab arm when the rotary frame drive is engaged.
•
Before beginning to work with the machine, learn how to operate it by reading this Instruction Manual taking into ac-
count occupational safety rules and recommendations for maintenance and adjustment.
•
The Instructions Manual must be kept with the machine. If you loan the machine for use, ensure that it is in good tech-
nical condition and that it is complete with the Instructions Manual.
•
Do not attach additional transport means to the machine.
•
During commissioning, check the machine functions and make the initial adjustments.
•
Due to the natural wear and tear the state should be controlled, using the recommendations described in Section 9
“ Maintenance ”.
•
When taking over and transporting the machine, inspect its technical condition to check for damage.
•
Standing under the raised grab arm is not allowed to prevent being crushed by the components of the machine.
•
When adjusting, keep your fingers and limbs away from the structural parts of the machine.
•
It is forbidden to leave a tractor ’ s cabin when the machine is running, and before all the rotating parts have stopped.
•
The operator of the vehicle working with the bale wrapper must ensure that no person is approaching the machine
during its operation, and the distance of at least
160’. from the working bale wrapper is always maintained.
•
Before you start wrapping, check that the rotary frame and other structural components will not collide.
•
Ensure suitable visibility when u - turning, reversing, or manoeuvring the machine, or ensure assistance from a properly
trained person.
•
When connecting the hydraulic hoses, make sure that the hydraulic system is not pressurised.
•
Do not stay between the vehicle and the machine when the vehicle engine is running.
•
Working on slopes exceeding 5% is not allowed.
•
Exercise particular caution when working on slopes.
•
Never leave the vehicle unattended when the engine is running. Before leaving the driver's seat (the cabin) turn off the
engine of the vehicle, remove the ignition key, and apply the parking brake.
•
Avoid wearing unbuttoned, hanging parts of work clothes during the operation, assembly, disassembly or adjustment.
Keep them away from any machine parts which are likely to catch them.