Econo-Wrap EW-1800T, Руководство оператора, Страница: 35 / 128

Self - loading Bale Wrapper EW - 1800T
35
6. Machine operation
The manufacturer shall ensure that the machine is fully operational and has been checked before being put into service.
Nevertheless, the user is obliged to check the machine after delivery and before the first use. Before commencing any
works related to coupling the bale wrapper with the tractor, the user should check the technical condition of the machine
and prepare it for commissioning. In order to do so, the user should:
•
read carefully all the information related to the safety, design, functioning, operation, transport, technical service, etc.
included in the manual,
•
familiarise themselves with the design and operating principle,
•
check the completeness of the machine, whether all required protections, screws are in place,
•
check the condition of screw connections, whether all screws are tightened – Table,
•
check the condition and pressure of tires,
•
check the appropriateness of wheel mounting,
•
check the painting coating condition,
•
check the overall condition of the machine with regard to any damage caused during transport, loading or due to other
circumstances (breakage, indentations, cracks, punctures, etc.),
•
check all lubrication points, whether there are lubrication signs (if needed, lubricate acc. to the guidelines in Section
“ Machine lubrication “),
•
check that the drawbar, bale lift arm and bale tipper are attached correctly,
•
check that the film dispenser post is fixed properly,
•
check the hydraulic system for tightness,
•
check the proper operation of the lighting system,
•
check the proper operation of the protection sensors.
After performing all activities and stating that the machine condition raises no concerns, the user may couple the bale
wrapper with the tractor.
Before each time the machine is used, its technical condition needs to be checked, and especially the condition of
units like rotation transmission system, hydraulic and electrical systems.