53
- Mode (digital, analog or automatic)
GPRS parameter
- User
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- APN: if no APN has been defined, press
[Options]
, then the APN menu.
Select or add an APN.
Once all the settings have been entered, you can activate the chosen service
provider. Select him from the list and validate your choice.
Linger timer
: is used to choose the time after which the call is automatically
disconnected if you have forgotten to log off from a service.
WAP Logging on
The connection to a WAP service on the GPRS network is not cut if an incoming
call is received. You can answer the call normally.
Using the
Welcome
menu, you can log onto your service provider‘s WAP site
by pressing the
key. If you are logging onto the GSM or GPRS network, the
@ symbol flashes. The metering of the cost of the call starts as soon as it stops
flashing.
WAP Logging off
To log off, press the
key. The logoff happens automatically after a few
seconds of inactivity if you forget to log off. This period is defined by the Linger
time setting.
GPRS
A flashing icon indicates that the phone is logging onto a GPRS network. A non-
flashing icon indicates that the GPRS network is available. If the icon is greyed
out, it indicates that the phone is logged onto the GPRS network. This icon is not
displayed if the GPRS network is not available or if the SIM-card inserted in your
phone does not support the GPRS service.
1.12 Applications
Services
This item may not be present on your phone’s menu, as it depends on the inserted
SIM-card.
Alarm
On the Applications menu, select the Alarm menu and
[OK]
.
Select
Activate
or
Deactivate
and validate. Set the wake-up time by entering the
numbers directly or using the navigation stick and validate.
