63
Bluetooth is activated, but the phone cannot be
found by other unknown Bluetooth devices. Known
or paired devices function normally.This mode
can be selected in the Options menu under „On &
hidden“.
The phone can detect other Bluetooth devices, but
it cannot be paired with them. To do this Bluetooth
must be set to „On & visible“ again.
Bluetooth
This menu allows you to set your phone Bluetooth connection in order to
communicate with other devices equipped with Bluetooth: for example, an audio
connection with a car kit or a data connection with a PC.
My Bluetooth name
: allows you to assign a name to your phone for the Bluetooth
connection. This name is displayed on the devices connected.
Paired devices
: allows you to search for devices which may connect with
Bluetooth link with your phone (for instance: headset).
Mode
: allows you to activate the phone Bluetooth connection.
- Off: Establishing a Bluetooth connection is not possible.
- On and hidden: your phone is not detected by the other devices but the phone
detects the other devices.
- On and visible: your phone can be detected by another device.
IrDA
This menu enables you to activate or deactivate the infrared connection.
Serial speed
This menu enables you to select the speed to be used for transmitting data via
your phone‘s serial port. Unless there are any special requirements the default
setting should be maintained (automatic).
Car kit
This menu enables you to configure the phone‘s options for a Headset or a car kit
(Automatic reaction, Switch off, Volume).
SyncML
You can synchronise your Phonebook, Organizer or Tasks with your network
operator‘s archives, depending on the options offered by your network opera-
tor. Local synchronisation with a computer is only possible via the Wellphone
software. To enable this function you need to activate your phone‘s Infrared or
Bluetooth setting or configure the USB connection.