Ecom Instruments Ex-PMR 1000, Руководство по эксплуатации

Страница: 14 / 30

39
two times.
5. Press the monitor key again. One long and three short signal tones confirm
that channel number 8 has been selected.
8.4.3.2 Pilot tones
Please observe:
After programming is complete, switch the unit off and back on again, so that
it is back in the operating mode.
All of the CTCSS/DCS pilot tones are listed in the following table.
After confirmation of a signal number ≥ 10, a short trace occurs between the
tens and the units.
No. CTCSS/DCS No. CTCSS/DCS No. CTCSS/DCS No. CTCSS/DCS
0 OFF 25 156,7 Hz 50 D072 75 D261
1 67,0 Hz 26 162,2 Hz 51 D073 76 D263
2 71,9 Hz 27 167,9 Hz 52 D074 77 D265
3 74,4 Hz 28 173,8 Hz 53 D114 78 D271
4 77,0 Hz 29 179,9 Hz 54 D115 79 D306
5 79,7 Hz 30 186,2 Hz 55 D116 80 D311
6 82,5 Hz 31 192,8 Hz 56 D125 81 D315
7 85,4 Hz 32 203,5 Hz 57 D131 82 D331
8 88,5 Hz 33 210,7 Hz 58 D132 83 D343
9 91,5 Hz 34 218,1 Hz 59 D134 84 D346
10 94,8 Hz 35 225,7 Hz 60 D143 85 D351
11 97,4 Hz 36 233,6 Hz 61 D152 86 D364
12 100,0 Hz 37 241,8 Hz 62 D155 87 D365
13 103,5 Hz 38 250,3 Hz 63 D156 88 D371
14 107,2 Hz 39 D023 64 D162 89 D411
15 110,9 Hz 40 D025 65 D165 90 D412
16 114,8 Hz 41 D026 66 D172 91 D413
17 118,8 Hz 42 D031 67 D174 92 D423
18 123,0 Hz 43 D032 68 D205 93 D431
19 127,3 Hz 44 D043 69 D223 94 D432
20 131,8 Hz 45 D047 70 D226 95 D445