Ecoflam 3145132, Руководство пользователя

Страница: 6 / 34

6 www.ecoflam­burners.com
EN
420010930200
M
A i r
G as
313
144
142
141
120
150
314
34 9
M
350
151
100
143
T o be supp l ied by the insta ll er
T o be supp l ied by the insta ll er
144 G as go v ernor
150 T hrott l e v a lv e
151 G as train Siemens VG D ....
313 Min . gas pressure switch
314 Ma x. gas pressure switch ( optiona l)
34 9 A ir damper motor
350 G as damper motor
BURNER DESCRIPTION
Gas train ­ Kit ­ Accessories: assembly to the burner
MATCHING GAS TRAIN WITH DIAGRAM OF PRESSURE DROPS
ARE IN THE DEDICATED SECTION OF THIS MANUAL
VGD 20.503 Rp 2” / VGD 40.065 ­ 40.080 ­ 40.100 ­ 40.125
1. Main gas pipe
2. Ball valve ACS
3. Antivibration coupling ACS
5. Min gas pressure switch
EXPOR
T
GAS TRAIN
EN676
6. Safety gas valve + 10. Actuator
7. Working gas valve + 11. Actuator
8. Gas leakage control KITTC *
9. Gas filter ACS
KIT - MAX Gas pressure switch KITPRES
ACS - Gas train connection pipe GTCP **
Gas governor / Filter
FGDR - FILTER
Compulsory EN676
Max Pressure switch
KITPRES50
KITPRES150
Other accessories
Ecoflam gas trains are delivered separately for all gas and dual fuel burners and are available in different configurations:
Double gas valves with actuators and regulator VGD Siemens and min pressure ACS gas filter
1 2 3 9 11 10 5
6 7
Modulation Kit
KITMD-RWF50
Probe-...
!
WARNING: EN676 compulsory kit and accessories in order to comply to the safety regulations. Additional accessories and kits
shall be installed by the installer in accordance to the local safety regulations and codes of practise.
HOW TO INSTALL THE GAS TRAIN INTO THE BURNER AND CALCULATE THE OVERALL DIMENSIONS :
refer to the dimension page and thE gas train manual for all detailed information
!
GTCP­...* WARNING: in order to fit the gas train, the corresponding connection pipe must be ordered (GTCP size and fitting depend on the
burner and the gas train selected). Upon the installer responsibility it is mandatory to install additional support(s) in order to not overload the
burner body with the dead load of full gas train, accessories, piping and so on.
The burner body can stand just the gas valve and the piping between the gas valve and the body.