5
Do not change the size and rating of the fuse.
Appropriate measuring devices must be used and appropriate standards and instructions must
be followed. Before making any measurement, you must understand the operation manual of the
measuring device.
Do not open the device during operation.
If required on site, forklifts, cranes and other construction machinery must be operated by
qualified operators.
When the equipment is connected to a place with power supply, a supervisor must be appointed
to protect the switch to be turned off.
Operators shall wear work clothes, and protective equipment, and be equipped with special tools
in accordance with the requirements of local laws and regulations.
The installation work must be undertaken by full-time operators;
During wiring, two or more operators are not allowed to connect one wire at the same time.
During the installation process, each completed item must be inspected once, and cross
inspection is required.
The equipment must be installed in sequence, and no steps can be skipped.
Isolation belt must be set during installation to prevent irrelevant personnel from entering the site.
2.2 safety warning
Danger: an extremely dangerous situation
This warning sign indicates that there is an immediate danger that may cause
serious personal injury or death.
Warning: indicates a very dangerous situation
Indicates a potentially dangerous situation that may result in serious personal
injury or death.
Warning: indicates a dangerous situation
Indicates a potentially dangerous situation that may cause minor personal injury.
/ecoess.co.uk
Mobile : + 44 (0) 7729636318
Landline : + 44 (0)116 366 9980
Website : www.ecoess.co.uk
E-mail : [email protected]
72- Evington Road,
LE2 1HH Leicester, UK
