22
Picture 5-1 Fixed hole position (bottom view)
Bolt installation: After removing the hole slag, put the expansion bolts (4) into the
corresponding holes, hammer to the bottom with a hammer, install the nut + washer and tighten
it with a sleeve, and use a torque wrench to confirm the torque (96 N.M);
Picture 5-2 Installation view
6. wiring
For the cabling of this Bess system, please connect all cabling correctly according to the instructions
in this chapter.
/ecoess.co.uk
Mobile : + 44 (0) 7729636318
Landline : + 44 (0)116 366 9980
Website : www.ecoess.co.uk
E-mail : [email protected]
72- Evington Road,
LE2 1HH Leicester, UK
