To view the current room temperature, press the menu button to enter the
Temperature
context menu. The current
room temperature value is shown on the display.
To set the desired room temperature, in the
Temperature
context menu press the Enter button. The display shows the
set target temperature in the edit mode (the value is blinking). You can increase or decrease this value with the Edit
buttons. When finished, press the Enter button to confirm the set temperature. The display shows the current room
temperature.
Note
You can also use the remote control to set the desired room temperature.
In case your combustion system is equipped with the second room fan, you can also set the desired temperature for
the second room.
Note
The decimal points for setting the temperature depend on the configuration.
Setting the output power
The Fumis ALPHA controller regulates your combustion system for optimum performance. You can override these
settings and modify the burning power to reach the desired room temperature faster, or conserve fuel. The burning
power setting influences the fuel feeder and fan speed settings.
The burning power setting represents the maximum burning power the combustion system will use to heat up the
environment. When the set temperature is reached, the burning power is decreased automatically. For example: if you
choose burning power 3, the combustion system will only modulate between power 1 and 3 (based on desired
temperature).
To view the current burning power, press the menu button to enter the
Power
context. The current burning power
level value is shown on display.
For faster heating up to the desired room temperature you can increase the burning power setting. In the
Power
context press the Enter button. The display shows the burning power in the edit mode (the value is blinking). You can
increase or decrease this value with the Edit buttons. When finished, press the Enter button to confirm the set burning
power. Display shows the current burning power level. The fuel feeder is dosing the fuel faster and the heat exchange
fan operates faster to increase the output power.
To conserve with fuel and energy, you can decrease the burning power setting. The fuel feeder and fan will operate
slower and the set room temperature is reached slower.
Note
You can also use the remote control to set the desired burning power.
Setting the weekly timer programs
The Fumis ALPHA controller enables you to set the weekly timer programs to automate the operation of the
combustion system. You can set six different programs and select three programs for each day of the week. The
program defines the start time, the end time, and the desired temperature.
To set a program, press the menu button to enter the
Time
context and then press the edit button to select the
Weekly timer periods
. The display shows (3). Press Enter to select
Program 1
, display shows (P1), and then press Enter
again to access the edit mode for Program 1. The start time hour value is blinking. With the edit buttons set the
desired start time hour. Then press the right menu button. The start time minute value is blinking. Set the desired start
time minute. Press the right menu button and set the desired end time. Then press the right menu button to set the
