Note
The Fumis ALPHA menu structure depends on the configuration and options. The menu structure in
Figure 35 shows all possible menu entries. Depending on the selected configuration, some entries are
not available. In such cases the menu entry is not included and submenus are renumbered accordingly.
The display values are for representational purposes only and may differ from the actual display values.
Navigating the menu
To navigate the first level menu context use the left and right arrow buttons. The display shows the setting for the first
submenu entry.
To navigate the second level menu (the submenu), use the plus and minus buttons to move up and down. The menu
structure in the figure is inverted, so it may seem you are moving down the menu, but you are actually going up. For
easier navigation through the second level menu, the corresponding entry number in brackets is displayed briefly.
To modify a setting in the menu, press the Enter button to enter the edit mode for the selected setting. The display
value starts blinking. Use the plus and minus buttons to change the value. To move through the steps in the edit
mode, use the left and right arrow buttons. When finished, press the Enter button to save the setting and exit the edit
mode. The display returns to the menu entry you edited.
The display shows the set value, or the actual value, depending on the setting. For example, when you edit the
temperature, you enter the desired room temperature. After you exit the edit mode, the display shows the actual
temperature (which may differ from the set temperature). When you edit the fuel quality setting, the display shows
the set value.
To enter the third level menu, press the Enter button and then use the plus and minus buttons to move between the
entries. The procedure for modifying the settings is the same as in the second level menu.
To exit the edit mode without saving the changes, press the Cancel button. This button is also used for returning up
one level in the menu. For example, if you are editing the Program 3 in the Weekly Timer Periods menu entry, press
the Cancel button to discard the changes and return to Program 3. Pressing the Cancel button moves to Weekly Timer
Periods, then to Clock, and then to Burning Power in the Power menu context.
Setting the clock
The Fumis ALPHA keyboard enables you to set the current time and date.
To view the current time, press the menu button to enter the
Time
context. The current time is shown on display.
To set the time and date, in the
Time
context press the Enter button. The hour value is blinking. With the edit buttons
set the desired hour. Then press the right menu button. The minute value is blinking. Set the desired minute. Press the
right menu button and set the date in the same manner. The date is set in the format dd.mm.yyyy. Then press the
right menu button and set the day of the week. Set the corresponding number between 1 (Monday) and 7 (Sunday).
Confirm the time and date settings by pressing Enter.
Setting the room temperature
With the Fumis ALPHA controller you have two options for setting the room temperature. You can:
Use weekly timer programs
Set or modify the room temperature manually
Using the weekly timer programs you can fully automate the operation of your combustion system and little or no
user intervention is required. For more information refer to chapter
Setting the weekly timer programs
on page
16
.
You can also set or modify the room temperature manually. If you are using the weekly timer programs, this enables
you to temporarily override the program settings. The program settings are reset when conditions, set with the timer,
are met (for example, end time is reached and the combustion system turns off).