44
• No temperature. This means that the temperature that is currently active on the room controller is maintained
• A defined temperature value (this is programmed using the ‘PROG’ button as described below)
• Comfort temperature
• Lowering temperature
Using the ‘PROG’ button a defined target temperature as well as the length of time for the holiday/party function (if
activated) can be programmed:
• Briefly press the ‘PROG’ button once.
• Set the target temperature using the scroller.
• Briefly press the ‘PROG’ button once.
• Set the length of time for the holiday/party function using the scroller. The setting begins at 0.5 hours (‘h’ in the upper
left of the display) in 0.5 hour steps. For a time period longer than 23.5 hours, the setting continues in days (‘d’ in the
upper left of the display).
• Briefly press the ‘PROG’ button once.
• Save the settings by pressing the ‘MAKRO’ button.
• The display briefly shows ‘gespeich.’ (saved).
• Using the scroller you can now select the next room and proceed as described above.
• Pressing the ‘
w
’ button 4 times returns you to the normal operating mode.
Example of a macro temperature setting for bathroom and living room:
When ‘Makro 1’ is activated, the following parameters should become active:
• 23°C temperature in the bathroom for 5 hours after the macro has been activated
• The comfort temperature in the living room should be maintained permanently
To carry out the programming, proceed as follows:
Selecting
‘
Makro 1
’
and the bathroom:
• Briefly press the ‘
x
’ button once.
• Select ‘Sonderfkt.’ (special function) using the scroller.
• Briefly press the ‘
x
’ button once.
• Select ‘Makros’ (macros) using the scroller.
• Briefly press the ‘
x
’ button once.
• Select ‘Editieren.’ (edit) using the scroller.
• Briefly press the ‘
x
’ button once.
• Select ‘Makro 1’ using the scroller.
• Briefly press the ‘
x
’ button once.
• Select the ‘bathroom’ using the scroller.
Function setting
• Keep pressing the ‘FUNKTION’ button until the suitcase symbol ‘ ’ appears on the display.
FHT 8W Heat Demand Relay
Installation and User Guide
Product Code EHC-FH06
1
