21
• Select ‘Schalter’ (switch) using the scroller.
• Briefly press the ‘
x
’ button once.
• Select ‘Hauscode’ (house code) using the scroller.
• Briefly press the ‘
x
’ button once.
The following information is displayed:
Figure 17
• Using the scroller, select the first 4 digits of the desired house code (from 1111 to 4444, only digits 1, 2, 3 and 4
possible), in the example diagram above this is ‘1234’.
• Confirm your selection by briefly pressing the ‘MAKRO’ button once.
• The following information is displayed:
Figure 18
• Using the scroller, select the second 4 digits of the desired house code (from 1111 to 4444, only digits 1, 2, 3 and
4 possible).
• Confirm your selection by briefly pressing the ‘MAKRO’ button once.
• The display briefly shows ‘gespeich.’ (saved) and the house code has been saved in the FHZ1000.
• You now find yourself in the ‘Schalter’ (switch) menu again.
• After pressing the ‘
w
’ button three times, the FHZ1000 is in the normal operating mode again.
X
X
X
X
X
3. Address system
So that the receivers can be addressed directly and in combination, the FS20 wireless control system has a total of 256
different addresses (4
4
= 256). These 256 addresses are divided into 4 address types, as follows (available number in
brackets):
• Single addresses (225)
• Function group addresses (15)
• Local master addresses (15)
• Global master address (1)
One address from each address type can be assigned to each receiver. This means that each receiver can respond to
up to 4 different addresses, but only ever to one address per address type.
FHT 8W Heat Demand Relay
Installation and User Guide
Product Code EHC-FH06
1
