Bedienungsanleitung / User Manual SYNCHRONIKA
ENGLISH
32
after the water has been released. The coffee boiler is emptied out via the brew group. Activate the brew group lever
and release the water into the drip tray. Please make sure some water remains in the coffee boiler. Start-up of the
machine is the same as initial startup (item 5.1).
How to froth milk like a “Barista”
•
If possible, use cold, fresh milk with a fat content of approx. 1.5 % or 3 %. Even homogenized milk is
suitable - if you prefer.
•
Use a frothing container (made of metal) with a minimum volume of 0.5 litres. The diameter of the container
should not be too wide. A narrow and high container is perfect.
•
Open the steam valve for approx. 5 seconds to release the condensation water and to create dry steam.
•
Fill
1/3
of the frothing container with milk and place it under the steam nozzle. The nozzle should be immersed
in the middle of the frothing container, just below the surface.
•
Slowly open the steam handle or the steam lever valve. Steam pervades the milk.
•
Keep the frothing container still.
•
After a few seconds you will notice a light suction in the milk jug. Proper frothing begins. Move the milk jug
downwards while the milk level increases. The steam nozzle must be kept under the surface of the frothed milk.
•
Attention: When the desired amount of milk froth is reached, immerse the entire steam nozzle in the frothing
container for a short time and close the steam handle or the steam lever valve.
Milk proteins “froth” with a temperature up to 77°C.
Once this temperature is exceeded, the milk does not froth any further.
•
Advice: When milk frothing is finished, just shake the frothing container a little bit in order to make the milk
bubbles ascend to the surface and to get a compact milk froth.
•
After frothing the milk, release the steam into the drip tray to avoid blockage of the steam nozzle.
Содержание synchronika
Страница 1: ......