Page
15
of
23
HANDWAY CLEAN OUT PROCEDURE
The ECO-100 system is also equipped with a handway clean out port on the side of the vessel.
Never remove this handway if system is connected to compressed air or if the Deadman is activated.
•
Use an adjustable or pipe wrench to disassemble the handway assembly. This will give you
access to the inside of the vessel for a more thorough clean out.
•
A thorough clean out may be needed if moisture has entered the vessel and caused the
media to flow poorly.
•
While the handway assembly is disassembled, use this time to inspect the plunger and
plunger seal for normal wear and tear. Replace if components show noticeable wear or if the
plunger seal is causing air to leak out of vessel.
Handway
Assembly
