Eclipse CD5030, Справочное руководство

Страница: 9 / 119

7
English
How to operate the tuner
1
Press the [SOURCE/PWR] button
for less than one second. Press the
button several times, until the FM/
AM mode is displayed.
Listening to the tuner
1
Manually storing stations into memory
2 Select any button, from [1] to [6], and
press it for more than two seconds.
The selected station is now stored in a preset button.
Repeat the above procedure to store additional
stations one at a time in buttons [1] to [6], and
store them in memory.
Store a station to a preset button.
1 Press the [ ▲ ] button for more than
one second, until you hear a beep.
The automatic preset mode starts. "ASM
ON" will appear on the display, and stations
are automatically entered in memory under
buttons [1] to [6]. These buttons are called
preset buttons.
Automatically storing stations into memory. (The automatic preset mode: ASM)
Press the [ ] button or the [ ]
button to tune to the station that you
want to store in memory.
CAUTION
If the vehicle's battery is disconnected (for repairs to
the vehicle or for removing the main unit), all stations
in memory will be lost. In such a case, store stations in
memory again.
Press the [ ▲ ] button for more than
one second, until you hear a beep.
The automatic preset mode starts. "ASM
ON" will appear on the display, and stations
are automatically entered in memory under
buttons [1] to [6]. These buttons are called
preset buttons.
ATTENTION
Pressing the preset buttons ([1] to [6]) allows you to
make one-touch station selections. The frequency of
the selected station is indicated on the display.
When a new station is set in memory, the station
previously set in memory will be deleted.
If there are fewer than six receivable stations, the
stations set in the remaining buttons will be retained.
CAUTION
If the vehicle's battery is disconnected (for repairs to
the vehicle or for removing the main unit), all stations
in memory will be lost. In such a case, store stations in
the memory again.
•
•
•