26
Basic operation
Listening to the tuner
Press the [SOURCE] button repeatedly, until the FM/AM
mode is displayed.
1
This will turn the tuner on.
Press the [BAND/ASM] button to switch to the desired FM or
AM bands.
2
Radio bands will switch from FM1
FM2
FM3
AM in order
each time the button is pressed.
Press the [TRACK/SEEK] button to tune to a station.
3
Press and hold the [TRACK/SEEK] button to start the
automatic station search.
4
ATTENTION
If stations have been stored in memory, pressing a button
from [1] to [6] will directly select a station. (Refer to the section
"Manually storing stations into memory" on page 52)
[SOURCE] button
[BAND/ASM] button
[TRACK/SEEK] button
: Tunes to higher frequencies.
: Tunes to lower frequencies.
: Starts searching toward higher frequencies.
: Starts searching toward lower frequencies.