18
ESN security operating procedure
18
Button [6]
[DISP] button
ATTENTION
●
If there is a problem with the inserted CD, an [ERR] message will
appear for two seconds and the CD will be ejected. Reinsert the
ejected CD.
●
If a CD causes the [ERR] message to appear twice in a row, a
[CHANGE] message will appear for two seconds. Try another CD.
●
The Security indicator will flash whenever the vehicleメs ignition is
switched off.
ATTENTION
●
If a CD has already been inserted, a [SEC] message appears, and then
the CD is ejected.
●
If a security is activated, programming the Key CD is not available.
How to operate the ESN (Key CD) security
1
Check that main unit is in standby.
Refer to "Turning the power on and off" on page 23.
2
Press and hold button [6], then the [DISP] button, and hold both
for more than two second.
A [SEC] message appears, then in two seconds it will change to
[DISC].
The CD1200G is now ready to accept your Key CD in the CD slot.
3
Insert the CD into the slot.
A [SEC] message appears, then the Key CD is ejected.
How to program the Key CD