EcLine EC-PM-530B Series, Руководство пользователя

Страница: 75 / 83

EC-PM-530B User's Manual
- 68 -
Default: n1=0, n2=2.
FS W Turn quadruple-size mode on/off for Chinese character
Format: ASCII: FS W n
Decimal: 28 87 n
Hex: 1C 57 n
[Description]
When n
≤ *******1>B, quadruple-size mode is turned on.
When n ≤ *******0>B, quadruple-size mode is turned off.
GS FF Executes black mark detecting
Format: ASCII: GS FF
Decimal: 29 12
Hex: 1D 0C
[Description]
Execute black mark detecting. If black mark is detected, the printer stops feeding paper and returns a value
(AAH) by serial interface; If black mark is not detected, the printer feeds paper till the end of this page and
returns a value (55H) by serial interface.
GS
（
A Test command
Format: ASCII: GS
（
A pL pH n m
Decimal: 29 40 65 pL pH n m
Hex: 1D 28 41 pL pH n m
[Description]
pL=2, pH=0, n=0, m=1, 49
Enter HEX print mode (HEX DUMP)
To cancel this command, you must restart the printer.
GS
（
F Set offset of black mark orientation
Format: ASCII: GS
（
F pL pH a m nL nH
Decimal: 29 40 70 pL pH a m nL nH
Hex: 1D 28 46 pL pH a m nL nH
[Description]
The parameters set by this command will be valid even after the printer is restarted.
This command is used for selecting permission of black mark orientation control and used for setting the
beginning print-position offset or cutting/tearing position offset from black mark. This value is calculated by
dots number.
The parameters of this command are shown as follows:
pL+ (pH×256) =4, that is: pL=4, pH=0
1
≤ a ≤ 3,
m=0, 48
0
≤ (nL+nH×256) < 1700
EC Electronics, Ltd. www.eclinepos.com
EC Electronics, Ltd
No. 221 Wai Yip Street, Kwun Tong
Kowloon, Hong Kong
TEL : (852) 3590 6397
FAX : (852) 3590 6497
E-MAIL : sales@ecline.com.hk