manualshive.com logo in svg

EcLine EC-PM-530B Series, Руководство пользователя

Поделиться
Скачать
EcLine EC-PM-530B Series Скачать руководство пользователя страница 14

EC-PM-530B User's Manual

 

- 7 -

2.6 Installing the Driver

 

Please use the cable to connect computer with printer, then turn on the computer and the printer, put 
the driver CD into the CD-ROM. Install driver by the following ways: 

2.6.1 Auto-installing Way (Recommended) 

Double click the file "Setup.exe" in the driver disc, install driver by the prompt. 

2.6.2 Hand-operated Installing Way 

Figure 2-8 Installing the ribbon cartridge

 

Ribbon Cartridge

Ribbon Knob 

Rear Cover 

Front Cover 

Power Switch 

Cover-open Button 

Ribbon Core 

Note: 1. When your print becomes faint, you need to replace the ribbon cartridge. 

Otherwise, the print quality will be affected and the print head may be damaged.

2. To remove the old ribbon cartridge, firstly, make sure the power is turned off,

then as the above figure shows, hold the ribbon cartridge with your thumb and
middle finger, and then lift up the left side of the ribbon cartridge, and then take
out the ribbon cartridge. Install a new one as the above steps.

3. Please use the original ribbon cartridge only. Manufacturer will not honor

warranty when using unauthorized ribbon cartridge.

4. Please turn the ribbon knob in the direction as the arrow shows.

Caution: Don’t move the print head when the printer is powered on, or else, it may 

damage the printer. Moreover, don’t touch the print head if the printer has just 
been used as the print head may be hot.

 

Note: Auto-install way needs the operating systems of Windows 2000 and above and the 

operating systems of Window 98/ME and below are not supported.

 

Note: This installing way is used for people who have some knowledge on hand-operated 

installing and equipment application.

 

EC Electronics, Ltd.

www.eclinepos.com

EC Electronics, Ltd 

No. 221 Wai Yip Street, Kwun Tong 

Kowloon, Hong Kong

TEL : (852) 3590 6397 

FAX : (852) 3590 6497 

E-MAIL : [email protected]

Содержание EC-PM-530B Series




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды