USER MANUAL
– CAVIX
Page
13
of
16
INMANUUIN185 Rev.2019.04.01 / ENG
The shockwave released by the implosion of the bubble in the fatty tissue favors liquid drainage
and the liberation of fatty acids from the cell, which causes a visible reduction of the access
volume.
From the first treatment, it is possible to see a reduction in centimeters of the treated area and as
the sessions advance a progressive elimination of the “orange peel skin” which turns to look more
toned and notable firmer.
7.2 POWER REGULATION
To regulate the power, first pour the gel provided on the area to treat, put the manual applicator
on the gel, then press the pedal and start the rotary movement while slowly increasing the power
with the power button (1). Ask the patient when the sound turns annoying. In this case decrease
the power.
8. MAINTENANCE
The following procedures are recommended to conserve CAVIX in optimum working conditions:
Periodic cleaning of all external components.
Clean applicators.
Check connections.
Annual technical verification of the equipment..
For any type of maintenance work or revision contact your local distributor or nearest ECLERIS
office.
8.1 CLEANING
Before cleaning the CAVIX, disconnect the power cable from the electric power supply.
EXTERNAL SURFACES
To clean the outer surfaces of the device only use cotton or a cloth dampened in mild detergent
or soap. Only use adequate cleaning products prepared for electrical equipment following the
product’s instructions.
While cleaning, be careful not to let water or humidity get into the equipment.
Do not send to the autoclave any part or component of this device that is not specifically
marked as autoclavable.
Do no sterilize or immerse the device or its accessories
The cleaning, disinfection and sterilization of accessories not provided by ECLERIS must
be performed following the instruction provided by their manufacturer.
Do not use harsh detergents, solvents or other abrasive agents.
We recommend cleaning the external surface of the equipment every 15 days.