Ecler EVO4, Руководство пользователя

Страница: 17 / 29

17
REVERB
This is an effect that imitates the deterioration of sound waves in a space due to
reverberations against walls, ceilings, objects, etc. PARAM 1 regulates the TIME, and
PARAM 2 controls the DAMPING.
VOCODER
This is an effect that modulates a CARRIER signal using the signal from the channel
assigned to the effects channel. Using the UP/DOWN buttons, you can select the channels
going into the mixer as the carrier or the NOISE or SQR signals generated in the effects
module. You can use PARAM 1 to adjust the DECAY. When SQR is the carrier signal, you
can use PARAM 2 to adjust the PITCH.
LOOP SAMPLER
This is a phrase recorder/player. When this effect is enabled, you can use the TIME
UP/DOWN buttons to record, play or delete sound samples. Each effects processor has its
own sound bank; that is to say, there are a total of two sound banks, one in each processor.
The sound samples are stored in the memory of the EVO4 and remain there even if you
change effects; however, they are deleted when you turn off the mixer.
To record a sample:
1. Select the LOOP SAMPLER effect.
2. Use the INPUT encoder to select the input signal you would like to record the
sample from.
3. Make sure that there is no previously recorded sound sample (the LCD screen
should say EMPTY). If there is already a sample recorded, you must first delete
it.
4. Press the record butto
n (●). Auto-record begins when the record button is first
pressed and finishes 8 beats later. If you hold down the record button, the
sample will be recorded manually. When the record button his held down, an
orange-coloured LED will glow, and the word REC will appear on the screen.
When you are finished recording, the button will turn green and the LCD screen
will say READY.
To play a sample:
1.
Press the play button (►). The button will flash green, and the LCD screen will
say PLAY. The sample’s playback speed will be adjusted to the BPM of the
signal automatically.
2. To stop playback, press the pause button (

). The button will remain green,
and the LCD screen will say READY.
To delete a sample:
1. Press the ALT key and when it turns orange, hold it down as you press
●.