6
5.
Connect the power supply cables, signal input and link between the two units
to the connectors on the rear part of the housing. Ensure correct polarity in
the Euroblock terminals.
6.
Place the acoustic box in its final position, sliding it vertically downwards so
that the rear side of the rail slots into the bracket rail.
7.
Secure the safety wire on the rear part of the acoustic box to ensure that it
does not accidentally fall and cause any material and/or personal damage.
8.
Orientate the box to achieve the required position on the vertical and
horizontal axes. Tighten up the Allen screws on the bracket to fasten this
position on both axes.
