5
POSITIONING A ND FITTING
In the packing of the eMOTUS systems, you will find all you need to complete
installation of the two units.
The following should be observed as general rules:
•
Always install on solid, firm surfaces.
•
For good sound reproduction, there should be no hindrance between the
units and the audience.
•
Adjust the levels of sound pressure to reproduction requirements. Despite its
small size, the eMOTUS5P / eMOTUS5PB has a performance far higher than
that of domestic loudspeakers.
Procedure for installing
on a surface
:
1.
Make three 6 mm screw holes in the wall, aligned with the position of the
holes in the bracket.
2.
Insert three 6 mm wall plugs into the holes.
3.
Fasten the safety line on the rear of the bracket.
4.
Fit the bracket in place, after threading the line and loudspeaker wire through
the square hole in the bracket. Secure the bracket to the wall.
