17
STARTING AND STOPPING
See Figure 11 as bellow.
Fig 11
Connect the hedge trimmer plug to power supply.
To start the blade movement, push the lock-off button and then pull the trigger switch.
To stop blade movement, release the trigger switch.
ADJUSTING PIVOTING HEAD
See Figure 12
.
Disconnect the plug from the power supply.
Place the hedge trimmer or branch lopper on a flat surface.
Depress both pivot buttons and adjust trimmer or lopper angle adjustment head until it snaps securely into
place at one of their available positions indicated.
Fig 12
CAUTION:
Do not place hand between pivoting head and threaded base. Failure to heed this caution could result in a pinch
point injury.
CUTTING TIPS
WARNING:
