Cablite® VR LED Lighting System Installation Manual Rev 2.1
Electronic Controls, Inc.
7073 North Atlantic Ave. Cape Canaveral, FL 32920
800-633-9788
P a g e
|
6
6
System Overview
CabLite® Vandal Resistant (VR) Led system is a general downlighting systems for use in passenger,
residential and freight elevator cabs operating from one to twelve downlights. The high output, long life,
low voltage LED downlights provide general interior lighting that meets or exceeds ASME A17.1, local,
state and federal codes.
The CabLite® VR lighting system is available in 2 sizes. See Sections 7.2 VR2.25 Downlight
Dimensions, 7.3 VR2.75 Downlight Dimensions.
•
CabLite® VR2.25
•
CabLite® VR2.75
In addition, there are 3 options for the CabLite VR lighting system:
•
Lighting without dimming
•
Lighting with dimming
•
Lighting with dimming and emergency lighting
6.1
Downlights
Each downlight is equipped with 2 connectors (located on the top of the can) for stringing up to 12 lights
together. See section 7 Installation for more detail. The 2 connectors are interchangeable so it does not
matter which cable is connected to it. See Figure 1 - Downlight Connectors. Each downlight is secured
in place with a fastening collar so above access to the ceiling panel is required.
Figure 1 - Downlight Connectors
6.2
CabLite® VR without Dimming
The CabLite® VR without dimming lighting system consisting of the following:
•
1 to 12 downlights
•
12 or 24VDC power supply (mounted in gang box)
•
One 8’ cable for connecting first downlight
•
One 4’ cable for each additional downlight