Cablite® VR LED Lighting System Installation Manual Rev 2.1
Electronic Controls, Inc.
7073 North Atlantic Ave. Cape Canaveral, FL 32920
800-633-9788
P a g e
|
4
1
Introduction
This manual is intended to facilitate the installation of CabLite® VR2.25/2.75 lighting system
manufactured by Electronic Controls Inc. The audience of the material included in this manual is for
certified installation personnel. The CabLite® VR2.25/2.75 lighting system complies with modern
performance specifications and meets or exceeds code requirements. Installation and adjustments must
meet local, state and national codes.
2
Warning and Disclaimer
Thank you for purchasing equipment from ECI America. We want your new equipment to operate safely.
Anyone who installs or uses this equipment should read this publication (and any other relevant
publications) before installing or operating the equipment.
To minimize the risk of potential safety problems, you should follow all applicable local and national
codes that regulate the installation and operation of your equipment. These codes vary from area to area
and usually change with time. It is your responsibility to determine which codes should be followed, and
to verify that the equipment, installation and operation is in compliance with the latest revision of these
codes.
At a minimum, you should follow all applicable sections of the National Fire Code, National Electrical
Code, ASMEA17.1 Safety code for Elevators and Escalators and the codes of the National Electrical
Manufacturer’s Association (NEMA). There may be local regulatory or government offices that can also
help determine which codes and standards are necessary for safe installation and operation. Equipment
damage or serious injury to personnel can result from failure to follow all applicable codes and standards.
We do not guarantee the products described in the publication are suitable for your particular application,
nor do we assume any responsibility for your product design, installation or operation.
Our products are not fault-tolerant and are not designed, manufactured or intended for use or resale as
online control equipment in hazardous environments requiring fail-safe performance, such as in the
operation of nuclear facilities, aircraft navigation of communication systems, air traffic control, direct life
support machines or weapon systems in which the failure of the product could lead directly to death,
personal injury, or severe physical or environmental damage (“High Risk Activities”). ECI America, Inc.
specifically disclaims any expressed or implied warranty of fitness for High Risk Activities.
This publication is based on information that was available at the time it was printed. WE reserve the
right to make changes to the products and/or publications at any time without notice and without any
obligation.
3
Trademarks
All trademarks or registered product names appearing in this document, as they pertain to Electronic
Controls, Inc., are the exclusive property of Electronic Controls, Inc.
4
Conventions Used